Automatic Configuration Changes
292
G8264 Application Guide for ENOS 8.4
When a new profile is loaded, configuration settings for any unsupported features
will be ignored. However, these settings are retained in memory until you change
or save the current configuration under the new profile. Until then, you can return
to the old profile with all prior configuration settings intact.
Once you change or save the configuration under a new profile, any configuration
settings related to unsupported features will be reset to their default values. At that
point, you will have to reconfigure these settings or use a backup configuration if
you reapply the old profile.
For example, when using the ACL profile, because IPv6 is not supported in that
mode, IPv6 settings will be excluded when the configuration is saved. Then, if
returning to the Default profile, it will be necessary to reconfigure the IPv6
settings, or to use the backup configuration.