Ospfv2 Configuration Examples - Lenovo RackSwitch G8264 Application Manual

OSPFv2 Configuration Examples

1. Configure IP interfaces.
2. (Optional) Configure the router ID.
3. Enable OSPF on the switch.
4. Define the OSPF areas.
5. Configure OSPF interface parameters.
6. (Optional) Configure route summarization between OSPF areas.
7. (Optional) Configure virtual links.
8. (Optional) Configure host routes.
© Copyright Lenovo 2016
A summary of the basic steps for configuring OSPF on the G8264 is listed here.
Detailed instructions for each of the steps is covered in the following sections:
One IP interface is required for each desired network (range of IP addresses) being
assigned to an OSPF area on the switch.
IP interfaces are used for attaching networks to the various areas.
Chapter 35: Open Shortest Path First
569