MLD Capacity and Default Values
528
G8264 Application Guide for ENOS 8.4
Table
42 lists the maximum and minimum values of the G8264 variables.
Table 42.
G8264 Capacity Table
Variable
IPv6 Multicast Entries
IPv6 Interfaces for MLD
Note: IGMP and MLD share the IPMC table. When the IPMC table is full, you
cannot allocate additional IGMP/MLD groups.
Table
43 lists the default settings for MLD features and variables.
Table 43.
MLD Timers and Default Values
Field
Robustness Variable (RV)
Query Interval (QI)
Query Response Interval (QRI)
Multicast Address Listeners Interval
(MALI)
Other Querier Present Interval [OQPT]
Start up Query Interval [SQI]
Startup Query Count [SQC]
Last Listener Query Interval [LLQI]
Last Listener Query Count [LLQC]
Last Listener Query Time [LLQT]
Older Version Querier Present Timeout:
[OVQPT]
Older Version Host Present Interval
[OVHPT]
Maximum Value
256
8
Default Value
2
125 seconds
10 seconds
260 seconds [derived: RV*QI+QRI]
255 seconds [derived: RV*QI + ½ QRI]
31.25 seconds [derived: ¼ * QI]
2 [derived: RV]
1 second
2 [derived: RV]
2 seconds [derived: LLQI * LLQT]
260 seconds [derived: RV*QI+ QRI]
260 seconds [derived: RV* QI+QRI]