Lenovo RackSwitch G8264 Application Manual page 543

5. Enable the route map.
6. Turn BGP on.
7. Assign the route map to a peer router.
8. Exit Router BGP mode.
© Copyright Lenovo 2016
 Specify the Multi Exit Discriminator (MED) metric for the matched route.
RS G8264(config­route­map)# as­path­preference <AS number list (up to 32 entries)>
RS G8264(config­route­map)# local­preference <local preference value>
RS G8264(config­route­map)# metric <metric value>
RS G8264(config­route­map)#
RS G8264(config­route­map)#
RS G8264(config)# router bgp
RS G8264(config­router­bgp)#
Select the peer router and then add the route map to the incoming route map list,
RS G8264(config­router­bgp)#
or to the outgoing route map list.
RS G8264(config­router­bgp)# neighbor 1 route­map out <1‐255
RS G8264(config­router­bgp)#
enable
exit
enable
neighbor 1 route­map in
exit
Chapter 34: Border Gateway Protocol
<1‐255>
543