HydraulC Pump Seals - 3084Rt - Mec Speed Level Series Service & Parts Manual

Secton 5 - Hydraulc System
Drive Shaft Seal Replacement
1. Remove the shaft key.
2. Remove the snap ring.
3. Remove the shaft seal.
• Check the surface of the shaft and the housing for imperfections.
4. Install new shaft seal.
• Cover the keyway portion of the drive shaft with tape to prevent damage to the seal during
installation.
• Coat the shaft seal with grease.
• Seat the shaft seal with a seal setting tool.
5. Install the snap ring.
6. Install the shaft key.
Hydraulic Pump Rebuild
Pump rebuild should be performed only by a qualified mechanic. Contact MEC Technical Support
before attempting to rebuild the pump.
Page 22
Hydraulic Pump Seals - 3084RT
Be careful not to damage the drive shaft when removing the old seal������
Speed Level Seres - Servce & Parts Manual
January 2019