Fig. 10-27: List Editor - Siemens Sinumerik 840D sl Function Manual

05.07

Fig. 10-27: List Editor

The List Editor is divided into 3 sections:
1st section:
2nd section:
3rd section:
Note
Changes to the current list display do not take effect until the next time DNC
or DNC Admin is started.
Not all of the available languages are shown in this dialog; not only does this
ensure clarity, but it is also rarely the case that all languages supported by DNC
are used in one plant.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
Defaults with buttons that refer to the complete list display for the
display group in question. Complete list display means that the
list for all the languages in a display group is saved or deleted
or that changes are ignored (Cancel).
Section in which data can be entered with edit buttons and input
fields.
Preview of the list display set in the defaults.
DNC Plant/DNC Cell (FBDN1)
10 Configuration
FBDN1/10-227