Siemens Sinumerik 840D sl Function Manual page 51

05.07
Creating a new filter – general filter data
Choose the following:
View  Filter Editor...  Select Filter  New or
View  Filter Editor...  Select Filter  Copy or
View  Filter Editor...  Select Filter  Change to open this dialog (see below).
Fig. 3-14: Edit Filter dialog
Note
The filter name must be specified. The Comment field is optional. The other fields
can be used to specify who can use the filter. If you enter a station, the filter can
only be used on this particular station.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
3 Operator interface
FBDN1/3-43