Managing User Groups; Machine List For Users - Siemens Sinumerik 840D sl Function Manual

05.07

5.2.4 Managing user groups

Refer to Section 5.3.

5.2.5 Machine list for users

Fig. 5-4: Machine list for enabling/disabling nodes on a user-specific basis
General
You can disable or enable certain nodes (groups, machines, links) for specific
users explicitly. The steps for configuring this are carried out in DNC User
Administration although this applies to all products, that is, the dialog can also be
used by MCIS TPM, for example.
Selecting users
In the user list, you select the user for whom you want to create or change a
machine list.
Note
The machine list is not defined for the user logged on but instead for the user
selected in user administration.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
5 User administration
FBDN1/5-121