Fig. 10-4: Dnc Cell: Machine Properties Transmission Mode: Sinumerik* - Siemens Sinumerik 840D sl Function Manual

DNC Plant/DNC Cell (FBDN1)
10 Configuration
Machine-specific version strategy for the upload
If a global version strategy is not sufficient, you can also define a machine-specific
strategy. You can use the Version Strategy For Upload field for this in the bottom
left of the dialog box. If 0 is configured there, the global version strategy applies.
Other permissible values include 1-6 in accordance with the global version strategy
(see Section 10.5.2).
Note
If the machine properties in DNC Plant are edited on the server, a station PC
must be assigned to the machine via the Station input field.
Terminate manually
The Terminate Manually checkbox allows you to control how the system responds
if a current NC data upload job is terminated.

When you activate the checkbox, a dialog appears when the receive operation
is terminated. In this dialog, you can specify whether the data that has already
been received is to be accepted or rejected.

If you do not activate the checkbox, the receive operation is terminated without
a dialog appearing. No data is accepted.
See also: Uploading NC data

Fig. 10-4: DNC Cell: Machine properties transmission mode: SINUMERIK*

FBDN1/10-164
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07