05.07
Receive tab page / [RECEIVE] section
The Receive tab page describes the [RECEIVE] section of the machine
configuration file. The upload parameters for the machine server are set here.
Fig. 10-11: Config dialog / Receive tab page
Note
The ASCII characters are entered in decimal code (0 ...255).
Header size
The header size is specified in bytes. It indicates the number of header
characters to be deleted after the data has been received.
Extract from machine configuration file:
HeaderSize=8
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
10 Configuration
FBDN1/10-181