Siemens Sinumerik 840D sl Function Manual page 339

05.07
Section [TIME]
MessageTime =
The key parameter controls the dwell time (in ms) of the displayed messages of
DNC IFC SINUMERIK.
SysTime =
The key parameter controls the wait time for VB functions.
!
Warning
The parameter may only be changed during commissioning or after consultation
with the hotline!
DelayTime =
The key parameter controls the delay (in ms) of the list display of directories when
scrolling through the tree view of DNC IFC SINUMERIK.
Section [REFRESH]
Refresh =
N = Switch off automatic refreshing of the screen content
Y = Switch on automatic refreshing of the screen content
RefreshDelay =
Time between last operator action and first refresh
RefreshInterval =
Time in seconds between two refresh cycles
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
5 Configuration file

FBDN2/5-57