Procedure
See also
Copying/pasting/deleting program blocks (Page 117)
4.10.7
Editor settings
Enter the default settings in the "Settings" window that are to take effect automatically when
the editor is opened.
Defaults
Setting
Number
automatically
First block number
Increment
Display hidden lines
Display block end a
symbol
Universal
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
1.
Press the ">>" and "Open additional program" softkeys.
The "Select Additional Program" window is opened.
2.
Select the program or programs that you wish to display in addition to
the already opened program.
3.
Press the "OK" softkey.
The editor opens and displays both programs next to each another.
Meaning
Yes: A new block number will automatically be assigned after every line
•
change. In this case, the specifications provided under "First block
number" and "Increment" are applicable.
No: No automatic numbering.
•
Specifies the starting block number of a newly created program.
The field is only editable when "Yes" is displayed under "Number
automatically".
Defines the increment used for the block numbers.
The field is only editable when "Yes" is displayed under "Number
automatically".
•
Yes: Hidden lines marked with "*HD" (hidden) will be displayed.
•
No: Lines marked with ";*HD*" will not be displayed.
Note:
Only visible program lines are taken into account with the "Search" and
"Search and Replace" functions.
The "CFLF" (line feed) symbol ¶ is displayed at the block end.
Machining the workpiece
4.10 Editing a program
121