Siemens Sinumerik 840D sl Function Manual page 287

05.07
1 Introduction
The DNC IFC SINUMERIK software is used to connect CNC machines with
SINUMERIK* (PCU50/70 and MMC103) to the NC program management DNC
Plant or DNC Cell via the Ethernet network.
DNC IFC SINUMERIK provides user interfaces on the SINUMERIK operator panel
to request NC data, such as NC programs, workpiece data (e.g. in graphical form)
from the DNC Cell/Plant archive. NC data, e.g. optimized NC programs, can also
be uploaded to the DNC archive.
In this way, any required NC data and information (also in graphical form) is
available quickly and up-to-date on the SINUMERIK.
Fig. 1-1: SINUMERIK with DNC IFC SINUMERIK connection to DNC via an Ethernet
network
SINUMERIK*:
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
SINUMERIK 810D
SINUMERIK 840D
SINUMERIK 840Di
PCU50 under Windows with SINUMERIK 840D sl
1 Introduction
1


FBDN2/1-5