Siemens Sinumerik 840D sl Function Manual page 193

05.07

Number of significant lines
This parameter specifies the number of lines as of line 1 within the NC data file
in which a search is made for the request ID DlgID.
Extract from machine configuration file:
DlgScanLines=10

ID for request
This parameter defines the ID of a request made by the CNC machining unit by
means of the dialog function.
Extract from machine configuration file:
DlgID=%MPF9999

ID for response
This parameter defines the ID of a response to a request made by the CNC
machining unit by means of the dialog function.
The response can have the following content:
List (response to list request)
Error message (response to a program request that cannot be fulfilled)
Extract from machine configuration file:
DlgIDSend=%MPF9998

End ID for response
The End ID for Response to a request via the dialog function is formulated via
the DlgSendEnd parameter. It terminates either a list or an error message.
Extract from machine configuration file:
DlgSendEnd=M30

Command for NC data request with release ID
DlgSendCmd is the command for requesting NC data with a release ID via the
dialog function. The parameter is a string that must be formulated in
accordance with the NC program.
Extract from the machine configuration file:
DlgSendCmd=(S)

Command for NC data request with trial cut ID
DlgSendTcCmd is the command for requesting NC data with a trial cut ID via
the dialog function. The parameter is a string that must be formulated in
accordance with the NC program.
Extract from the machine configuration file:
DlgSendTcCmd=(ST)
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
10 Configuration
FBDN1/10-185