Siemens Sinumerik 840D sl Function Manual page 310

DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
4 Functions
Directly editing filter criteria
It is possible to directly edit filter criteria in the relevant screen line without having to
use Change and Accept changes. Which criteria can be directly edited is
indicated in the * column (* in the line of the respective filter criterion means that it
can be directly edited). Two preconditions must be satisfied for this:
1. The following parameter must be set in DNC_IFC.INI:
[GLOBAL]
...
FilterInlineEdit =1
2. The Editable button must be activated in DNC when creating the filter
criteria.
If the first criterion is not satisfied, the * column is not displayed.
Note
Expansions or deletions of filter criteria are not performed in DNC IFC
SINUMERIK, but in DNC Cell/Plant.
FBDN2/4-28
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07