05.07
12.2.2 Configuration in DNC Admin
You can use DNC Admin in configuration mode to configure the machine
properties for the auto archive function.
Note
The user must be assigned the necessary authorizations for these functions.
See: User administration
Fig. 12-2: Machine properties in configuration mode
You first have to set the transmission module "SINUMERIK 840D ".
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
12 Auto archiving
FBDN1/12-265