Nc Data Upload (With Change Of Target, Name, Type) - Siemens Sinumerik 840D sl Function Manual

05.07

4.3.3 NC data upload (with change of target, name, type)

Fig. 4-5: Uploading NC data to a selectable target in DNC (target workpiece MOTOR in this
case)
General
The following can be performed during the transfer with this function (Transfer to
softkey):

The name of the target file can be changed.

The type of the target file and the target directory can be changed.

The NC file can be stored in a workpiece directory.
The NC data upload can be performed at an arbitrary position in the plant topology
(group, machine).
Changing the workpiece directory via an entry field in the target directory
With a new workpiece, this does not exist in the plant topology of the DNC- archive
and is not displayed in the list view. The new workpiece name must be entered.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
4 Functions
FBDN2/4-23