Siemens Sinumerik 840D sl Function Manual page 318

DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
5 Configuration file
[USER]
; Define the type of login:
; 0= No dialog, Name= and Password= is used
; 1= User and password must be entered
; 2= Login with parameter ACCESSLEVEL= assigned user
; 3= Login with parameter ACCESSLEVEL= assigned user or dialog
Login =0
; Because of the display group assignment by MCIS DNC, the user name
must be entered
; device-specifically for the same user, depending on the screen
resolution
Name =DNC
Password =DNC
; Access levels according to SINUMERIK HMI Advanced commissioning user
interface
ACCESSLEVEL0 =HMISystem
ACCESSLEVEL1 =HMIManufacturer
ACCESSLEVEL2 =HMIService
ACCESSLEVEL3 =HMIUser
ACCESSLEVEL4 =HMIKeyPosition3
ACCESSLEVEL5 =HMIKeyPosition2
ACCESSLEVEL6 =HMIKeyPosition1
ACCESSLEVEL7 =HMIKeyPosition0
[TIME]
; Wait time influences the duration of the display of the time-
controlled messages
MessageTime =1000
; Wait time for VB functions
SysTime =500
; Timer controls the delay of the list view display when scrolling in
the tree view
DelayTime =700
; Time during which the transfer of a program can be aborted
BreakTime =500
[REFRESH]
; Refresh list view regularly (Y=On/N=Off)
Refresh =N
; Values in seconds
; Time between last actuation and first refresh
RefreshDelay =10
; Time between two refresh operations
RefreshInterval =60
[GRAPHICTYPE]
; Permissible graphic types (in upper case letters)
TYPE1 =GIF
TYPE2 =JPG
TYPE3 =PDF
[DHDIR]
; Selectable view on DM directories (in upper case letters)
; xxx.DIR = DM directory name
; ;0= Do not create a pseudo workpiece
; ;1= Pseudo workpiece will be created
DHDIR1 =MPF.DIR;0
DHDIR2 =SPF.DIR;0
DHDIR3 =WKS.DIR;0
DHDIR4 =ARC.DIR;1
DHDIR5 =CST.DIR;1
DHDIR6 =CUS.DIR;1
DHDIR7 =CMA.DIR;1
DHDIR8 =MB.DIR;1
[MachineReference]
; MCIS machine ID
MaschineID1 =Maingroup\Group\PCU50_840D
FBDN2/5-36
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07