Ftp Interface - Siemens Sinumerik 840D sl Function Manual

05.07

5.2.3 FTP interface

Fig. 5-4: Configuration user interface / FTP interface
The FTP interface to the higher-level DNC system is defined in the FTP interface
tab. The configuration is only required when the transfer between the machine and
the higher-level DNC system is to be performed by means of FTP.
A connection test can be performed by clicking the Test connection button.
Note
Usually transfer by means of FTP should be avoided as the data is not encoded
for transmission via the network.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
5 Configuration file
FBDN2/5-49