Low Flowrate Alarm (2.8.10.) - Siemens SITRANS L 7ML5400 Operating Instructions Manual

Assigned Relay (2.8.9.4.)
Determines which relay (if any) will be activated when the High Flowrate Alarm activates.
Options
Alarm State (2.8.9.5.)
Read only. Used to view the current state of the High Flowrate Alarm.
Options
9.2.8.10

Low Flowrate Alarm (2.8.10.)

Available only on LUT440 (OCM model).
Reported when the OCM flowrate is within a user-defined range (see Low Flowrate Value ON
(2.8.10.2.) (Page 209) and Low Flowrate Value OFF (2.8.10.3.) (Page 209)).
Enable (2.8.10.1.)
Enables/disables Low Flowrate Alarm.
Options
Low Flowrate Value ON (2.8.10.2.)
Sets the flowrate value (defined in Flowrate Units (2.15.3.7.) (Page 238)) at which the Low
Flowrate Alarm will activate.
Values
Low Flowrate Value OFF (2.8.10.3.)
Sets the flowrate value (defined in Flowrate Units (2.15.3.7.) (Page 238)) at which the Low
Flowrate Alarm will de-activate.
Values
SITRANS LUT400
Operating Instructions, 04/2021, A5E33329501-AG
*
ACTIVE
INACTIVE
*
Range: 0.000 to 99999.000
Default: 0.000
Range: 0.000 to 99999.000
Default: 0.000
Parameter reference (LUI)
9.2 Setup (2.)
NO RELAY
RELAY 1
RELAY 2
RELAY 3
ENABLED
DISABLED
209