Siemens Sinumerik 840D sl Function Manual page 4

SINUMERIK® documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status codes in the "Remarks" columns:
A .... New documentation.
B .... Unrevised reprint with new order number.
C .... Revised edition with new status.
Release Order No.
03/03 6FC5297-1AE80-0BP0
04/05 6FC5297-2AE80-0BP0
05/07 6FC5297-2AE80-0BP1
04/10 6FC5297-2AE80-0BP2
Registered trademarks
All designations with the trademark symbol ® are registered trademarks of Siemens AG. Other
designations in this documentation may be trademarks whose use by third parties for their own purposes
may infringe the rights of the owner.
Disclaimer of liability
We have checked that the contents of this document correspond to the hardware and software
described. Nonetheless, differences might exist and therefore we cannot guarantee that they are
completely identical. Nevertheless, the information contained in this document is reviewed regularly and
any necessary changes will be included in subsequent editions.
Copyright © Siemens AG 1995 - 2010.
Order no. 6FC5297-2AE80-0BP2
Siemens AG 2010.
Subject to change without prior notice
Remark
A
C
C
B