General - Siemens Sinumerik 840D sl Function Manual

DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
5 Configuration file

5.1 General

The settings of DNC IFC SINUMERIK are configured using a configuration
program. This is started in the Windows service mode of the SINUMERIK 840D
with PCU50 at f:\Add_on\DNC_IFC, or with MMC103 at c:\Add_on\DNC_IFC, by
double-clicking the DNC_IFCCFG.exe file. The configuration performed with the
configuration program is then stored in the DNC_IFC.INI configuration file.
Example of a DNC_IFC.INI configuration file
; MCIS DNC IFC SINUMERIK V2 - initialization file
; "DNC_IFC.INI"
;
; This file can be customized with "DNC_IFCcfg.EXE"
;
[GLOBAL]
; Higher-level database type
; (0 = MSDE/SQL Server / 1 = Oracle)
DataBaseType =0
; TRACE 1-3 can be activated for a detailed recording
; Only change temporarily during troubleshooting!
TRACE =1
; IP address or DNS name of the higher-level DNC server
DNC-HOST =MCISDNC2
; Use FTP protocol
; (0=No / 1=Yes with local DNC_IFCDB / 2=Yes with remote DNC_IFCDB)
FTP protocol =0
; File type change
; (Y=On/N=Off)
; Note:
; DataTypeChange=Y
DataTypeChange =N
HWSystem =32
; Default transfer target switchable via Select softkey
; (Y=Softkey available / N=Softkey not available)
ToggleSK =Y
; Default transfer target
; (MMC=Transfer to MMC / NCK=Transfer to NCK)
; Switchable via softkeys (MMC_NCK=Transfer to MMC or NCK ->
ToggleSK=Y set)
DefaultTransfer =MMC_NCK
; Standard directory when starting DNC IFC:
; (0=Machine / 1=Group / 2=Higher-level group)
StartupLayer =0
; Job interfaces mode
; (0=Interactive / 1=Automatic)
AuToDownLoad =0
; Time in minutes after which an unfinished job is deleted
DeleteTime =60
AutoResolution =Y
SwitchLanguage =
; FontName =Arial Unicode MS -> only relevant for languages with
special characters (such as Russian, Chinese)
FontName=
; 0 = Do not overwrite, 1 = Overwrite
; The check as to whether an NC program is already available only functions
correctly with DriveInternPath = 0
OverwriteNCData = 1
FBDN2/5-34
DriveInternPath cannot be set to 1 or 2 if
Motion Control Information System DNC (FBDN) - 04/10 Edition
© Siemens AG 2010 All Rights Reserved
05.07