Siemens Sinumerik 840D sl Function Manual page 89

05.07
Upload
When you select one of more of the required NC data files on the right and then
choose Upload, the system uploads the data to DNC.
To upload all of the NC data in a directory, you can also select the appropriate
directory in the tree structure.
Note
You cannot upload all the NC data files and subdirectories at once by selecting a
directory.
Delete
To delete data on the machine, select an NC data file and then choose Delete.
Multiple selections are also possible here.
Configuring the SINUMERIK* view
In the SINUMERIK* machine configuration dialog, you can configure which
directories on the controller can be viewed by the user.
See also: Chapter 10 "Configuration dialog"
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
4 NC data management
FBDN1/4-81