Fig. 12-3: Dialog For Selecting Data Areas - Siemens Sinumerik 840D sl Function Manual

DNC Plant/DNC Cell (FBDN1)
12 Auto archiving
Creating the input file for the
auto archive run from the determined data
The PCU50 services function can be used to create the input file for generating an
archive manually.
You can use the Select button to select the required data areas (e.g. "Machine
data channel 1", "Setting data axis 2", and "Tool offsets").
An archive is then created "manually" ("Archive" pushbutton).
Once the archive has been created, an input file (ARCHIVXX.IN) in which the
parameters for creating this archive are entered is stored in the F:\tmp directory.
This file can now be copied 1:1 to the F:\add_on directory and, if necessary,
renamed to something more meaningful (e.g. NCACTDATA.IN). This name must
be entered in the ARCJOB parameter in the appropriate machine configuration file
(see also: Section 10.4.5 - Configuration dialog for the SINUMERIK* connection
type).
Note
If you have any further questions about the services server, contact the hotline.

Fig. 12-3: Dialog for selecting data areas

FBDN1/12-272
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07