Description Of The 1St Section Of The Screen Editor - Siemens Sinumerik 840D sl Function Manual

DNC Plant/DNC Cell (FBDN1)
10 Configuration

10.9.2 Description of the 1st section of the Screen Editor

General
The defaults also determine which preview is displayed. The display group also
determines which complete screen description is currently being modified and
will be saved. Complete screen description means that the screen description is
saved for all the languages used.
Fig. 10-32: Screen Editor – 1st section
Using the Display Group combination field, you can choose the appropriate
display group or create a new group. If you change the display group, you have to
decide whether you want to save the changes made so far.
All the other fields are used for setting the preview.
You use the Screen Type combination field to specify the type of screen you want
to create and display in the preview. You can use the New NC data option to
generate the screen for creating a new NC administrative data record. Using
Display/Change, you can configure the screen in which you can view or change
existing NC administrative data.
The Large Display checkbox allows you to display a magnified or normal-sized
version of the preview. If a large display format has been configured for the
selected display group, this setting must be selected so that the screens are
displayed and configured with the correct display format.
The Language combination field is used to change the language for the preview.
The Page combination field is used to change the tab page displayed in the
preview.
The menu options in the View menu perform the same functions as the
combination fields.
By choosing EditTabulator Sequence, you can display or change the tab
sequence in the relevant screen. You can then make an entry in the Tabulator
field in the 2nd section of the Screen Editor.
FBDN1/10-234
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07