Siemens Sinumerik 840D sl Function Manual page 64

DNC Plant/DNC Cell (FBDN1)
3 Operator interface
Print program list
The function for printing program lists can only be called up in the tree view (left
window) via the Print Program List context menu. This function activates the
printout of the DNC program list in the window on the right.
Only users with the appropriate authorizations are allowed to use the print function.
See Section 5.3.5
Print format
You can set the format for the printout by choosing Tools  Settings.
The field contents printed depend on whether a list description (see Section 10.8.2)
has been configured.
FBDN1/3-56
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07