Siemens Sinumerik 840D sl Function Manual page 312

DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
4 Functions
Quick filter
Fig. 4-11: Quick filter
The following precondition must be satisfied for the quick filter to be displayed:
The following parameter must be set in DNC_IFC.INI:
[GLOBAL]
...
Quickfilter =1
The quick filter function allows you to change a filter value without having to call up
the filter selection.
Once you have selected a filter, the first filter condition of the current filter is
displayed in three fields in the toolbar area. The first two fields contain the field
name and operand, while the third field, which can be edited, contains the current
filter condition value.
If another condition is to be displayed in the quick filter, the order of the conditions
must be changed in the filter editor of DNC Cell/Plant.
Note
The value of the filter condition is treated in the same way as a value with a
wildcard, although the wildcards are not displayed in this field.
Examples:
Program name = A
means that the system filters according to program names that contain "A"
e.g. Program1, Appl_1, 135_A_xzy
Program name = A*
means that the system filters according to program names
that begin with "A"
e.g. Appl_1
FBDN2/4-30
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07