Refreshing The Displayed Nc Data; Online Help; Languages - Siemens Sinumerik 840D sl Function Manual

DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
3 Operator interface

3.2.2 Refreshing the displayed NC data

During active system operation, new NC programs are accepted, released,
deleted, etc. in the DNC archive by NC programmers. In order that these changes
in the DNC archive are also displayed in DNC IFC SINUMERIK, the display is
refreshed:

Automatically when DNC IFC SINUMERIK is switched to the foreground

Cyclically when this has been set in the configuration user interface. The time
between the last operator action and the first refresh as well as the time
between two refresh cycles, can also be set.

3.3 Online help

The online help for operator support of the DNC IFC SINUMERIK software can be
called via the Information key. The online help contains information on the current
operator control screen as well as on the system operation.

3.4 Languages

If the language is changed on the controller, DNC IFC SINUMERIK automatically
adjusts to the new language when the language is available for DNC IFC
SINUMERIK.
DNC IFC SINUMERIK is supplied in the languages: German, English, French,
Spanish, Italian, Chinese and Russian. The online help is available in the
languages: German, English (for English, Chinese and Russian DNC IFC
SINUMERIK), French, Spanish and Italian.
FBDN2/3-14
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07

