05.07
After logging in, a configuration dialog opens with six tabs:
Basic settings
DNC
FTP interface
Graphics
Login
Job interface
This configuration dialog can be exited either by clicking the Cancel button or by
pressing the Esc key and on the operator panel with the CANCEL key. The login
screen of the configuration user interface then appears again.
Configured data can be saved either by clicking the Accept button or by pressing
the Ctrl+S keys and on the operator panel with the CTRL+S keys.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
5 Configuration file
FBDN2/5-39