Siemens Sinumerik 840D sl Function Manual page 166

DNC Plant/DNC Cell (FBDN1)
10 Configuration
Edit configuration tables (Tools  Config. Tables). This dialog allows you to
display the selected database table as it currently appears in the database and, if
you are an administrator, edit it.
Note
The user must be assigned the necessary authorizations for these functions.
See also: User administration
Additional functions in DNC
Based on the filter, the Create CSV File function creates a CSV file that contains
all the NC data of the selected group or machine and, depending on how the
system is configured, the associated field contents (e.g. name, type, release, etc.).
You can open the file in the Notepad editor or Microsoft Excel.
Download NC data (File  Download) allows the user to send NC data from DNC
to the NC machine.
Upload NC data (File  Upload) allows the user to send NC data in the other
direction from the NC machine to DNC.
User for Editor (Tools  User for Editor) enables an existing Windows user in
DNC to be disclosed who is assigned write authorization for Windows editors (for
example, Notepad, etc.) irrespective of the current DNC user. This user
authorization allows editable files to be edited and stored in DNC regardless of
whether the current DNC user has write authorization.
The Machine Comparison function is used to determine which programs exist on
the machine as compared with the data management system for this machine in
DNC. You can also carry out a comparison between files on the machine and in
DNC. This function is only available on machines with SINUMERIK* and PCU50/70
as well as DNC IFC SINUMERIK.
Note
The user must be assigned the necessary authorizations for these functions.
See also: User administration
FBDN1/10-158
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07