Siemens Sinumerik 840D sl Function Manual page 319

05.07
NCDataDescription_1]
D1 =NCDATANAME
D2 =NCDATATYPE
D3 =RELEASEID
[NCDataDefaultvalue_1]
D1 = SPF
D2 =1
[DNCMMCTypeTab]
; Data types from MCIS DNC are converted to data types on MMC/PCU
; Number of types for conversion
DNCMMCTypeCount=2
; Conversion types (e.g. convert TXT to MPF)
DNCMMCType1 =TXT MPF
DNCMMCType2 =DOC INI
[MMCDNCTypeTab]
; Data types from MMC/PCU are converted to
; Number of types for conversion
MMCDNCTypeCount =2
; Conversion types (e.g. convert MPF to TXT)
MMCDNCType1 =MPF TXT
MMCDNCType2 =INI DOC
; Copyright (c) SIEMENS A&D, ALL RIGHTS RESERVED
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
5 Configuration file
data types on DNC
FBDN2/5-37