Siemens Sinumerik 840D sl Function Manual page 125

05.07
Password
The password is required by users to identify themselves when they log on. For
security purposes, the password must be entered again in the Confirm Password
field.
Note
As delivered, a user DNC (password: DNC) is always defined with administrator
rights.
During commissioning, you should create a new administrator and delete the user
DNC or, at the very least, assign it a new password.
User group
An existing user group for assigning user rights and the display group can be
selected in the User Group selection field. If a user group with the required access
rights or display group does not exist, you must create a new user group. To call up
the dialog for creating/modifying user groups, choose User Groups.
See also: "Managing user groups"
Filter activated
If the Filter Activated checkbox is activated, the last filter used is active for this
user once the user has logged on.
Note
If a filter has not yet been defined, the user has an unfiltered view of all the NC
data defined in the system.
Large display
The Large Display checkbox determines the size of icons and text when displayed
on the user interface. The large display makes the user interface easier to read for
users in workshops.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
5 User administration
FBDN1/5-117