05.07
4.3 NC data upload from the SINUMERIK to DNC Cell/Plant
4.3.1 View of the data management
Fig. 4-4: Data management
General
The Data Management screen provides the machine operator with a user interface
to view the NC programs available in the SINUMERIK and for the NC data upload.
Target
In the upper area of the screen, the target in the DNC Cell/Plant archive is
displayed.
This target area (group, machine) is set in the configuration user interface.
Source
The lower area of the screen contains the contents of the data management in a
tree view and list view.
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
4 Functions
FBDN2/4-21