DNC Plant/DNC Cell (FBDN1)
10 Configuration
Upload Dialog tab page (SINUMERIK* machine configuration) [UPLOADDLG]
The Upload Dialog tab page is the [UPLOADDLG] section of the machine
configuration file for SINUMERIK* machine connections.
Note
The SINUMERIK* directories that the user can see for the upload from
SINUMERIK* are defined here.
Fig. 10-16: Config dialog SINUMERIK* / Upload Dialog tab page
The list on the left contains all of the possible SINUMERIK* directories. You can
use the arrow buttons to move selected directories to or delete them from the list of
selected DM directories on the right.
Extract from machine configuration file:
DHDIR1=MPF.DIR
DHDIR2=SPF.DIR
FBDN1/10-202
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07