Volkswagen Passat 1995 Official Factory Repair Manual page 608

Valve train, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Camshafts, removing and installing
Removing
- Set engine to TDC for Cyl 1. marks by turning in
engine running direction on the vibration damper
securing bolt Page 13-21
- Remove cylinder head cover
Repair Manual, 2.8 Liter VR6 2V Fuel Injection
& Ignition, Repair Group 28; Remove ignition coil
-N152-
- Remove double chain tensioner.
- Remove camshaft sprocket cover complete with
Camshaft Position sensor -G40-.
- Loosen camshaft sprocket mounting bolts.
Note:
Only counter-hold camshaft using 24 mm open end
wrench -arrow-. The camshaft jig 3268 must not be
in place when tightening or loosening the chain
sprockets.
- Remove camshaft sprockets.
Page 13 of 22
15-23
.
Page 15-9 .
5/12/2004