Volkswagen Passat 1995 Official Factory Repair Manual page 659

Radiator and radiator fan, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
- Align engine mounts stress-free by rocking
engine assembly.
- First tighten assembly mountings front and right-
rear, then tighten left-rear assembly mounting,
Page 10-11 .
Repair Manual, 2.8 Liter VR6 2V Fuel Injection
& Ignition, Repair Group 24; Install intake hose
- Installing ribbed belt
- Filling with coolant
Tightening torques
Component
Coolant pump to cylinder block
Pulley to coolant pump
Coolant expansion tank to body
Intake Air Temperature sensor to
intake manifold upper section
Drain plug in coolant pipe
Front exhaust pipe to three-way
catalyst
Page 6 of 7
Page 13-20 .
Page 19-13
Tightening
torque
20 Nm
(15 ft lb)
25 Nm
(18 ft lb)
10 Nm
(7 ft lb)
15 Nm
(11 ft lb)
10 Nm
(7 ft lb)
25 Nm
(18 ft lb)
5/12/2004
19-20