Volkswagen Passat 1995 Official Factory Repair Manual page 592

Cylinder head, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
Cylinder head cover, removing
and installing
Removing
Repair Manual, 2.8 Liter VR6 2V Fuel
Injection & Ignition, Repair Group 28;
Remove spark plug connectors along
with ignition wires
- Remove ignition wire guides -1- and -
2-.
- Remove cover above intake manifold
upper section -3-.
- Disconnect crankcase breather valve
off of cylinder head cover and
breather hose to EVAP canister
purge regulator valve from intake
manifold upper section.
- Remove intake hose from throttle
body.
- Disconnect connectors off throttle
position sensor, heater element, Idle
Air Control valve and Intake Air
Temperature sensor.
- Detach accelerator cable from
throttle body and support bracket (do
not remove locating clip).
- Remove coolant hose off throttle
body and plug off (first release
pressure from cooling system).
Page 14 of 16
15-9
5/12/2004