Volkswagen Passat 1995 Official Factory Repair Manual page 673

Fuel supply system components, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
- Connect Fluke 83 multimeter to kick-
down switch using jumper wires from
VW 1594 adaptor kit.
- Check resistance at switch.
Specification:
- Slowly move accelerator pedal in
direction of wide open throttle.
Shortly after the kick-down pressure
point the resistance must drop to:
O
At this point the accelerator pedal must
be just off the stop.
Page 13 of 26
20-13
5/12/2004