Parameter Data Record; Dependencies For The Configuration - Siemens SIMATIC ET 200eco PN M12-L Equipment Manual

Parameter data record

B.1

Dependencies for the configuration

The parameter settings are dependent on each other when configuring the I/O device. These
dependencies must be considered when configuring with the latest HSP in STEP 7 TIA. When
configuring with the GSD file or with data record 128, these dependencies must be observed.
Dependencies of the parameter settings
This table lists the parameters and their dependencies.
Table B- 1 Dependencies of the parameter settings
Configuration
mode
Low volt-
age 1L+
DI
x
DQ
x
x = property is allowed, – = property is not allowed, * = property is not relevant
CM 8x IO-Link + DIQ 8x24VDC M12-L 8xM12 (6ES7148-6JJ00-0BB0) communications module
Equipment Manual, 12/2022, A5E51718265-AB
Diagnostics
Missing Short- Wire
2L+ circuit break
detection
and
alarm
x x x
x x *
Input delay Hardware
interrupt
on rising
edge
x
• 0.05 ms
• 0.1 ms
• 0.4 ms
• 0.8 ms
• 1.6 ms
• 3.2 ms
• 12.8 ms
• 20 ms
* *
B
Hardware Reaction to
interrupt on CPU STOP
falling edge
x *
*
• Shutdown
• Keep last
value
• Output
substitute
value 1
84