Scheduled Servicing (Reader Unit) - Canon iR C6800 Series Portable Manual

4) Check the waste toner case.
If half full or more, dispose of the waste toner in a vinyl bag or the like for collection; or, replace the waste toner case.
- If you need to dispose of the waste toner, be sure to do so in strict accordance with the regulations imposed by the
local authorities.
- Do not dispose of waste toner in a fire. Doing so may cause an explosion.
5) Clean the copyboard glass and the reading glass.
6) Make test copies.
7) Make sample copies.
8) Check the operation of the leakage breaker.
With the power switch at ON, push the test switch of the leakage breaker to see that it operates normally (i.e., the
breaker switch shifts to the OFF side to cut off the power).
If the leakage beaker fails to operate normally, replace it, and run a check once again.
<Resetting the Breaker>
When you have made the check, turn off the main power switch, and turn on the breaker switch, and then turn the
main power switch back on.
9) Put the sample copies in order, and clean up the area around the machine.
10) Record the final counter reading; at this time, be sure to fill out the blanks for 'FX-UP-RL' and 'DV-UNT-K'
(service counters).
11) Fill out the Service Book, and report to the person in change. Be sure to update the history of checks on the
leakage breaker in the Service Book.

1.3.2 Scheduled Servicing (reader unit)

iR C6800C / iR C6800CN
Do not use solvents or oils other than those indicated herein.
Unit
Original
exposure
system
Wo Interva
Location
rk
Copyboard glass clea 195,000
n images
T-1-7
Remarks
ls
clean the face, back, and the white plate on the
back.
Chapter 1
0003-4139
1-15