Canon iR C6800 Series Portable Manual page 88

Chapter 2
[2]
[1]
F-2-51
5) Mount the ITB cleaning unit [2] to the intermediate
transfer unit [1]; then, fix it in place using 2 screws
[3].
[3]
[2]
[3]
F-2-52
6) Turn the drive gear [3] until the area [2] of blade
lubricant is no longer visible on the intermediate
2-34
[1]
transfer belt [1].
[2]
[1]
[3]
F-2-53
If you have replaced the ITB cleaner blade, be sure
to perform the following:
1) Execute the following service mode item (black
band
COPIER>FUNCTION>CLEANING>BK-BNDEX.
2.5.11 After Repacking the
Photosensitive
Cleaning Blade
iR C6800C / iR C6800CN / iR 5800C / iR 5800CN
Be sure of the following when mounting the
photosensitive drum cleaning blade:
1. Do not turn over the cleaning blade. Replace it
when one side has been used.
2. Clean the area [1] of the retainer plate coming into
contact with the cleaning blade and the blade plate [2]
using alcohol; then, dry wipe it to remove any toner.
The fine particle of toner under the blade edge can
sequence):
Drum
0004-4224