Canon iR C6800 Series Portable Manual page 306

Subheadi
ng
W/SCNR Use it to specify the presence/absence of a reader unit (as for the copier
model).
Settings
0: printer model
1: model with reader unit
at time of shipment: 1
upon RAM initialization: 0
RUI-DSP
Use it to set the copier function optional settings for the RUI screen.
Settings
0: do not display copy screen for RUI
1: display copy screen for RUI
at time of shipment/upon RAM initialization: 0
NW- Use it to select a data transfer speed for connection to a service network.
SPEED
Settings
0: Auto
1: 100Base-TX
2: 10Base-T
at time of shipment/upon RAM initialization: 0
ADJ-LVL Use it to select an operation mode for patch detection.
Of the automatic adjusting sequences used, decreasing/increasing the
frequency of potential control/primary transfer ATVC will lead to
decrease/increase productivity.
Method of Adjustment
A higher setting will increase the adjustment intervals and, thus, increase
the productivity; it, however, will also increase color fluctuation.
Settings
0 to 4
at time of shipment/upon RAM initialization: 0
INTROT-
intervals of executing ATVC during initial multiple rotation (number of
1 prints)
- Increase the setting if soiling in the form of dots occurs in keeping with
drum rotation (i.e., by increasing the intervals of ATVC control).
- Decrease the setting if transfer faults occurs (i.e., by decreasing the
intervals of ATVC control).
Settings
0 to 240
at time of shipment/upon RAM initialization: 90
COPIER>OPTION>BODY
Contents Level
1
1
1
1
1