Canon iR C6800 Series Portable Manual page 258

Chapter 5
Subheadin
HLMT-
PTY/M/C
LLMT-
PTY/M/C
DMAX-Y/
M/C
P-TG-Y/M/
C
<BLANK>
5-64
COPIER>ADJUST>DENS
g
Use it to set an upper limit to patch target density correction (Y/M/C).
range of adjustment: -20 to 20 (unit: 0.1%)
at time of shipment/upon RAM initialization: 0
If possible, do not use it as long as machine operation is normal.
Use it to set a lower limit to patch target density correction (Y/M/C).
range of adjustment: -20 to 20 (unit: 0.1%)
at time of shipment/upon RAM initialization: 0
If possible, do not use it as long as machine operation is normal.
Use it to set an offset value for the Y/M/C density control target value.
Method of Adjustment
Set an offset value for the Y density control target value while in 2D-
MAX control.
range of settings: -8 to 8
at time of shipment/upon RAM initialization: 0
Use it to set an offset value for the ATR control target value (Y/M/C).
Method of Adjustment
Set an offset value for the target value of the Y toner while in ATR
control.
range of settings: -108 to 108
at time of shipment/upon RAM initialization: 0
Contents Level
2
2
2
2