Canon iR C6800 Series Portable Manual page 145

Code Cause/Particulars of detection
8005 The paper pushing plate leading edge
position sensor does not go on when the
paper pushing plate motor has been
driven for 0.3 sec or more.
The paper pushing plate motor (M8S)
or the paper pushing plate leading edge
position sensor (PI5S) is faulty.
E5F8 There is an error in the saddle connector.
0001 The connector of the guide home
position sensor is identified as being
disconnected.
The connector of the guide home
position sensor (PI3S) is faulty.
0002 The connector of the paper pushing
plate home position sensor is identified
as being disconnected.
The connector of the paper pushing
plate home position sensor (PI14S) is
faulty.
0003 The connector of the paper pushing
plate leading edge position sensor is
identified as being disconnected.
The connector of the paper pushing
plate leading edge sensor (PI15S) is
faulty.
E5F9 There is an error in the saddle switch.
0001 With any of the following sensor is
identifying its respective cover a being
closed, the inlet cover switch is
identified as being open for 1 sec or
more after the start of the initial rotation
of the machine or the start of printing:
- inlet cover sensor (PI9S)
- front cover open/closed sensor (PI2S)
- delivery cover sensor (PI3S)
Or, the front cover switch (MS2S) or
the delivery cover switch (MS3S) is
open.
The inlet cover switch (MS1S), front
cover switch (MS2S), or delivery cover
switch (MS3S) is faulty.
Remarks
The paper pushing plate motor (M8S)
or the paper pushing plate leading edge
position sensor (PI5S) is faulty.
Check the connectors of the guide
home position sensor (PI13S). Check
the connectors of the paper pushing
plate home position sensor (PI4S).
Check the connectors of the paper
pushing plate leading edge position
sensor (PI5S).
Check the connectors of the paper
pushing plate leading edge position
sensor (PI5S).
Check the inlet cover switch (MS1S)/
front cover switch (MS2S)/delivery
cover switch (MS3S).