Chapter 5
Subheadin
ATR-EX
INTR-EX
<SENS-ADJ>
Subheadi
ng
STCK-
LMT
- Adjusting the Soft Tray Full Sensor Position
1) Loosen the screws [1], and temporarily fix both full sensors in place farthest from the paper.
5-102
COPIER>FUNCTION>MISC-P
g
Force ATR control.
Use it to force ATR control if the correction value for ATR control is
lost, as after E020 (field servicing) or after replacing the DC controller
PCB.
Use it to force initial rotation, as the first thing in the morning.
You can force the various image stabilization control mechanisms
(usually executed first thing in the morning during initial rotation)
consisting of the following:
- rotation control
- single rotation ATVC
- patch detection
- Dmax
The operation takes about 1 min.
COPIER>FUNCTION>SENS-ADJ
Adjusting the Position of the Shift Tray Full Sensor
The notation will be 'ON' when detecting the full condition; otherwise,
'OFF'.
Contents
T-5-58
Contents
Level
2
2
Level
1