Canon iR C6800 Series Portable Manual page 107

right margin is as indicated:
- if not, make the following adjustments:
1. Adjusting the Left/Right Margin for the Left
Deck
1) Push the release button, and slide out the left deck.
2) Using a flat-bladed screwdriver, detach the left face
cover [1].
[1]
F-2-99
3) Loosen the 2 screws [1], and insert a screwdriver
[2] through the opening of the left front stay; then, turn
the adjusting screw to adjust the left/right margin.
[1]
F-2-100
4) Check to make sure that the left/right margin of the
printouts on paper from the left deck is as indicated.
5) As necessary, make the following adjustments:
[2]
[1]
[2]
F-2-101
- turn the screwdriver counterclockwise to decrease
the left margin [1].
- turn the screwdriver clockwise to increase the left
margin [2].
A full turn of the screwdriver will change the left
margin by 1.0 mm.
6) Tighten the 2 screws you loosened in step 3).
7) Attach the left face cover you removed in step 2)
back to the machine.
8) Close the left deck.
- If the gap between the front cover/cassette 3 front
cover and the left front cover is appreciable, perform
the following:
9) Slide out the left deck, and loosen the 4 screws [1];
then, shift the front left cover [2].
[1]
F-2-102
10) Close the left deck; when the gap is gone, slide out
the left deck once again, and tighten the 4 screws you
loosened in step 9).
Chapter 2
[1]
[1]
[2]
2-53