Canon iR C6800 Series Portable Manual page 318

Subheadi
ng
STS- Enabling/Disabling the TOT Synchronous Command Communication
PORT
Port
Use it to enable or disable the inquiry/response (synchronous) command
communication port for TUIF over TCP/IP.
Settings
0: OFF 1: ON
at time of shipment/upon RAM initialization: 0
CMD-
Enabling/Disabling the TOT Asynchronous Status Communication Port
PORT Use it to enable or disable the asynchronous status communication port
for TUIF over TCP/IP.
Settings
0: OFF 1: ON
at time of shipment/upon RAM initialization: 0
MODELS Global Support for Copyboard Original Size Detection (mix of AB/Inch)
Z2 When the setting is '1' , the machine will support global mode (AB/Inch)
regardless of the setting of the swing flag MODEL-SZ (AB, Inch).
Settings
0: normal
1: AB/inch mix detection
at time of shipment/upon RAM initialization: 0
SZDT- Use it to enable/disable the switch-over from CCD size detection to
SW
photo size detection for copyboard original size detection.
Settings
0: disable photo size detection
1: enable photo size detection
at time of shipment/upon RAM initialization: 0
COPIER>OPTION>BODY
Contents Level
2
2
2
2