Chapter 5
Subheadin
ACS-EN
ACS-CNT
ACS-EN2
ACS-
CNT2
<EXP-LED>
Subheadin
g
PR-EXP
5-80
COPIER>ADJUST>MISC
g
Use it to adjust the ACS identification area.
Settings range
-2 to +2
at time of shipment/upon RAM initialization: 1
Use it to set the ACS identification chrome count area.
Settings range
-2 to +2
at time of shipment/upon RAM initialization: 0
Use it to adjust the ACS identification area (for stream reading).
Method of Adjustment
- a higher setting will increase the area of identification.
Settings range
-2 to +2
at time of shipment/upon RAM initialization: 1
Use it to adjust the count area for the chrome identification pixels for
ACS identification (for stream reading mode).
Method of Adjustment
- a higher setting will increase the area of identification.
Settings range
-2 to +2
at time of shipment/upon RAM initialization: 0
COPIER>ADJUST>EXP-LED
Use it to set the pre-exposure LED current level for when
potential control is off (feed speed at 1/1)
Settings range: 31 to 58
at time of shipment/upon RAM initialization: 44
Contents
T-5-42
Contents
Level
2
2
2
2
Level
2