Canon iR C6800 Series Portable Manual page 291

COPIER>FUNCTION>CLEAR
Subheadin
g
CNT- Use it to reset the counter readings controlled by the main controller
MCON
PCB (main) for service work.
(For the counters whose readings will be reset, see the list under
COUNTER mode.)
The counter readings will not be reset until the OK key is pressed.
CNT-
Use it to reset the readings of the following counters controlled by the
DCON DC controller PCB:
- COPIER> COUNTER> DRBL- 2> SORT
- COPIER> COUNTER> DRBL- 2> FIN-STPR
- COPIER> COUNTER> DRBL- 2> FIN-PDDL
- COPIER> COUNTER> DRBL- 2> SADDLE
- COPIER> COUNTER> DRBL- 2> SDL-STPL
The counter readings will not be initialized until the OK key is
pressed.
1) Select the item, and press the OK key.
OPTION Use it to reset the service mode settings (OPTION) back to their
default settings (as when initializing the RAM).
The settings will not be reset until the OK key is pressed.
The data that will be reset is data on the main controller, DC controller,
and reader controller.
Method of Operation
1) Print out the settings using the following service mode item:
COPIER>FUNCTION>MISC-P>P-RING.
2) Select the item, and press the OK key.
MMI
Use it to reset the following settings in user mode.
- backup data (user settings) used to back up the copier control panel
- backup data (user settings) on common settings
- backup data (user settings) of various type expect on fax
The settings will not be reset until the main power switch has been
turned off and then on.
Method of Operation
1) Select the item, and press the OK key.
2) Turn off and then on the main power.
Contents Level
1
1
1
1