Canon iR C6800 Series Portable Manual page 169

Cause
You have received data that cannot be
processed (contains MIME information
that is not supported).
# 828
You have received HTML data.
# 829
Data that contains more than 1,000 pages
is received.
# 830
A DSN (Delivery Status Notification)
error notification is received because of an
incorrect I-fax address or destination
setting, or the data size of the sent
documents exceeds the mail server
capacity.
# 831
An I-fax document could not be received
using SMTP because of the RX/Print
Range setting in IP Address Settings in
TCP/IP Settings in Network Settings in
System Settings (from the Additional
Functions screen).
# 832
DSN (Delivery Status Notification) mail
was not sent because TCP/IP Settings or
E-mail/I-Fax in Network Settings in
System Settings (from the Additional
Functions screen) have not been set, or
trouble has occurred in the mail server.
# 833
Remedy
Check the settings, and ask the sender to
resend the data.
Ask the sender to use a file format other
than HTML, and resend the data.
This machine can print or store up to 999
pages of data in memory, but will delete
any data that exceeds this limit. Ask the
sender to resend the remaining pages.
1. Check the I-fax address or destination
setting.
2. Set Maximum Data Size for Sending in
E-mail/I-Fax Settings in Communication
Settings in System Settings (from the
Additional Functions screen) so that it is
less than the mail server capability.
3. Check the status of the mail server, DNS
server, and network.
Reset the RX/Print Range setting in IP
Address Settings in TCP/IP Settings in
Network Settings in System Settings (from
the Additional Functions screen).
1. Check the DNS Server Settings and IP
Address Settings in TCP/IP Settings, and
E-mail/I-Fax in Network Settings in
System Settings (from the Additional
Functions screen).
2. Check the status of the mail server and
DNS server.